TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 735 of 783

TM 9-2350-260-20-1-3

STEERING CONTROL LINKAGE ADJUSTMENT (Sheet 1 of 13)

TOOLS:

7/16 in. combination box and open end wrench

9/16 in. combination box and open end wrench

3/4 in. combination box and open end wrench

Torque wrench with 1/2 in. drive (0 to 175 lb-ft)(0-237 N

•

m)

9/16 in. socket with 1/2 in. drive

Needle nose pliers

1/4 in. socket head screw key (Allen wrench)

SUPPLIES:

Cotter pin (MS24665-287)

Metal locating pins (four required - 1/8 in. by 2-1/2 in. long)

Metal pin (1/16 in. by 2 in. long)

REFERENCE:

TM 9-2350-260-10

PRELIMINARY PROCEDURES:

Adjust track tension (TM 9-2350-260-10)

Block tracks (TM 9-2350-260-10)

Remove transmission shroud (page 9-19)

TURRET REMOVED

FOR CLARITY

Go on to Sheet 2

TA146430

15-2