TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 744 of 783

TM 9-2350-260-20-1-3

STEERING CONTROL LINKAGE ADJUSTMENT (Sheet 10 of 13)

58. Remove steering rod end bearing (AM) from clevis

(AN).

59. Using 9/16 inch wrench, loosen jamnut (AP).

60. Insert locating pins (V) and (AF).

61. Using allen wrench through steering rod end bearing

(AM), turn clockwise or counterclockwise until screw

(AL) will pass freely through steering rod end

bearing (AM) and clevis (AN).

BEHIND LEFT AMMUNITION RACK

LEFT SIDE OF HULL

(TO REAR OF FUEL TANK)

62. Place steering rod end bearing (AM) into clevis (AN).

63. Remove locating pins (V) and (A).

64. Using 9/16 inch wrench, install screw (AL).

65. Using 9/16 inch wrench, tighten jamnut (AP) onto rod end bearing flat (AQ).

Go on to Sheet 11

TA146439

15-11