TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 746 of 783

TM 9-2350-260-20-1-3

STEERING CONTROL LINKAGE ADJUSTMENT (Sheet 12 of 13)

LEFT SIDE OF HULL

(TO REAR OF FUEL TANK)

BEHIND LEFT AMMUNITION RACK

79. Using 3/4 inch wrench, install nut (AJ).

80. Using pliers, install new cotter pin (AH).

81. Install 2A powerplant (page 14) or 2D powerplant

(page 5-40).

82. Insert locating pin (V).

LEFT SIDE OF TANK

83. Attempt to insert locating pin (B).

84. If locating pin (B) can be inserted, remove locating pin (B) and go to step 94.

85. If locating pin (B) cannot be inserted, remove locating pin (V) and use 9/16 inch wrench to remove screw (AX).

86. Remove steering rod end bearing (AY) from clevis (AZ).

87. Using 9/16 inch wrench, loosen jamnut (BA).

88. Insert locating pins (B) and (V).

Go on to Sheet 13

TA146441

15-13