TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 747 of 783

TM 9-2350-260-20-1-3

STEERING CONTROL LINKAGE ADJUSTMENT (Sheet 13 of 13)

89. Using 9/16 inch wrench on steering rod end bearing

fiat (BB), turn clockwise or counterclockwise until

screw (AX) will pass freely through steering rod end

bearing (AY) and clevis (AZ).

90. Using fingers, install screw (AX) through steering rod

end bearing (AY) and clevis (AZ).

91. Using 9/16 inch wrench, tighten jamnut (BA).

92. Remove locating pins (B) and (V).

93. Using torque wrench with socket, tighten screw (AX)

to 15-20 lb-ft (20-27 N

•

m).

NOTE

If steering is unacceptable, notify

support maintenance personnel.

94. Check steering controls with tank operating

(TM 9-2350-260-10).

95. Install transmission shroud (page 9-20).

96. Install

fixed

fire

extinguisher

control

valve

(page 20-42).

97. Install fixed fire extinguisher cylinders (page 20-51).

98. Install left ammo rack (page 17-9).

99. Unblock tracks (TM 9-2350-260-10).

LEFT SIDE OF TRANSMISSION

End of Task

TA146442

15-14