TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 752 of 783

TM 9-2350-260-20-1-3

FRONT STEERING CONTROL ROD ASSEMBLY REPLACEMENT (Sheet 1 of 3)

TOOLS:

Slip joint pliers

Torque wrench with 3/8 in.

drive (0-200 lb-in.)(0-23 N

•

m)

9/16 in. combination box and open end wrench (2 required)

9/16 in. crowfoot adapter with 3/8 in. drive

6 ft steel tape

Hammer

1/8 in. punch

SUPPLIES:

Cotter pin (MS24665-281)

Pencil

Paper

REMOVAL:

1.

Using pliers, remove cotter pin (A) from pin (B).

Throw cotter pin away.

2.

Using pliers, remove pin (B), washer (C), and washer (D).

3.

Using wrench, remove bolt (E) from link (F).

4.

Remove rod assembly (G).

Go on to Sheet 2

TA146447

15-19