TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 180 of 1008

TM 9-2350-261-20-2

REPLACE FUEL FILTER MOUNTING BRACKET (M577A2 AND M1068 WITH

200 AMP GENERATOR ONLY) — Continued

0233 00

2.

Remove four screws (6), lockwashers (7), and bracket (5) from engine. Discard lockwashers.

INSTALLATION

NOTE

Generator (1), with bracket (2) and turnbuckle assembly (3) attached, must be placed on right

side sponson prior to installing new fuel filter mounting bracket due to space restrictions.

1.

Place generator (1), bracket (2), and turnbuckle assembly (3) on right side sponson inside power plant compartment.

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

2.

Apply thin coat of sealing compound to threads of four new screws (4).

0233 00-2