TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 177 of 1008

TM 9-2350-261-20-2

REPLACE GENERATOR FIELD SWITCH

0232 00

THIS WORK PACKAGE COVERS:

Removal (page 0232 00-1).

Repair or Replacement (page 0232 00-1).

Installation (page 0232 00-2).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Materials/Parts

Sealing compound (WP 0782 00, Item 60)

Personnel Required

Unit Mechanic

Equipment Condition

Engine stopped (see your -10)

Carrier blocked (see your -10)

Rear power plant access panel removed

(see your -10)

REMOVAL

1.

Disconnect circuit 1A/1B lead (1) from generator field switch (2).

NOTE

Earlier switches may have a threaded pipe plug without a head or no plug at all. Discard the

pipe plug with the switch. Do not reuse pipe plug because it can be installed too deeply and

short out the new switch.

2.

Remove switch (2) from tee (3) on secondary fuel filter (4).

REPAIR OR REPLACEMENT

1.

Check circuit lead. Replace worn or cracked lead and damaged connector (WP 0312 00, WP 0313 00, or WP 0314 00).

023200-1