TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 174 of 1008

TM 9-2350-261-20-2

REPLACE GENERATOR-REGULATOR CIRCUIT BREAKER (100 AMP

GENERATOR ONLY) — Continued

0231 00

2.

Remove five screws (6), lockwashers (7), and distribution box (5) from hull mounts (8). Discard lockwashers.

3.

Remove locknut (9), two washers (10), and screw (11) from terminal strip (12) and distribution box (5). Discard locknut.

NOTE

Some carriers have four lockwashers on circuit breaker.

4.

Remove two screws (13), four/two lockwashers (14), terminal strip (12), and circuit 3 lead (15) from circuit breaker

(16). Discard lockwashers.

5.

Remove two locknuts (17), screws (18), and circuit breaker (16) from distribution box (5). Discard locknuts.

REPAIR OR REPLACEMENT

1.

Check terminal strip. Replace circuit breaker that has cracked terminal strip.

0231 00-2