TM-9-2350-261-20-2
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4
TM-9-2350-261-20-2 - Page 166 of 1008
TM 9-2350-261-20-2
ADJUST VOLTAGE REGULATOR (100/200 AMP GENERATOR) — Continued
0229 00
NOTE
On carriers that have standard auxiliary power receptacles, touch red lead to positive and black
lead to negative sockets in the receptacle.
6.
Place red lead (4) in positive socket of NATO plug (5) on auxiliary power (slave) receptacle (6). Touch negative lead (7)
to outside of NATO plug (8) on receptacle.
CAUTION
Battery can get overcharged and explode if the charging volts exceed 29. Adjust voltage
regulator to 29 volts.
NOTE
Do not force adjusting screw past stop. If regulator cannot be adjusted, replace bad regulator
(WP 0230 00).
Use insulated cross-tip screw driver #1 to adjust voltage.
0229 00-2
Back to Top
