TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 170 of 1008

TM 9-2350-261-20-2

REPLACE REGULATOR ASSEMBLY (100/200 AMP GENERATOR) — Continued

0230 00

NOTE

Ground lead is on 200 amp system only.

2.

Remove four screws (4), eight lockwashers (5), ground strap (6), and mount plate (7) with attached regulator (3) from

hull weldnuts. Discard lockwashers.

3.

Remove four screws (8), eight lockwashers (9), and mount plate (7) from regulator (3). Discard lockwashers.

4.

Remove nut (10), lockwasher (11), and other end of ground lead (6) from ground stud (12). Discard lockwasher.

REPAIR OR REPLACEMENT

1.

Check cables. Replace worn or cracked cables and damaged connectors (WP 0312 00, WP 0313 00, or WP 0314 00).

0230 00-2