TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 160 of 1008

TM 9-2350-261-20-2

REPLACE GENERATOR AND ADJUSTMENT LINKAGE (200 AMP

GENERATOR ONLY) — Continued

0228 00

2.

Disconnect cable (7) from generator (8). Remove nut (9), lockwasher (10), and generator ground lead (3) from

generator. Discard lockwasher.

3.

Remove two cotter pins (1), pin (2), and fan drive tensioner (3) from bracket (4) on transfer gearcase. Discard cotter pins.

4.

Remove locknut (5), screw (6), rod end (7), and spacer (8) from bracket (4). Discard locknut.

5.

Remove locknut (9), screw (10), rod end (11), and spacer (12) from generator (13). Discard locknut.

6.

Remove two rod ends (7) and (11) from turnbuckle (14). Remove jam nut (15) from rod end (7).

7.

Remove three screws (16), two key washers (17), lockwasher (18), washer (19), and bracket (4) from transfer gearcase.

Discard key washers and lockwasher.

0228 00-2