TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 155 of 1008

TM 9-2350-261-20-2

REPLACE GENERATOR AND ADJUSTMENT LINKAGE (100 AMP

GENERATOR ONLY) — Continued

0227 00

NOTE

If replacing generator, do Steps 8 - 10.

8.

Remove three screws (10) and washers (11) securing pulley (12) and bushing (13) to generator shaft (14).

9.

Use three screws (10) to separate pulley (12) and bushing (13). (Install three screws in three threaded holes of pulley.

Tighten screws until you are able to separate pulley from bushing.)

10. Remove pulley (12) and bushing (13) from generator shaft (14). Remove key (15) from generator shaft.

022700-3