TM-9-2350-261-20-2
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4
TM-9-2350-261-20-2 - Page 153 of 1008
TM 9-2350-261-20-2
REPLACE GENERATOR AND ADJUSTMENT LINKAGE (100
AMP GENERATOR ONLY)
0227 00
THIS WORK PACKAGE COVERS:
Removal (page 0227 00-1).
Installation (page 0227 00-4).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0780 00, Item 29)
Socket Wrench (WP 0780 00, Item 96)
Torque Wrench (WP 0780 00, Item 101)
Materials/Parts
Antiseize compound (WP 0782 00, Item 8)
Key washer (2)
Lockwasher
Locknut (6)
Locknut (3)
Personnel Required
Unit Mechanic
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Battery ground lead disconnected (WP 0294 00)
Power plant rear access panels removed (WP 0431 00)
Generator drive belts removed (WP 0226 00)
REMOVAL
1.
Disconnect cable (1) from generator (2).
2.
Remove locknut (3), screw (4), rod end (5), and spacer (6) from generator (2). Discard locknut.
3.
Remove locknut (7), screw (8), rod end (9), and spacer (10) from bracket (11). Discard locknut.
022700-1
Back to Top
