TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 538 of 1008

TM 9-2350-261-20-2

REPLACE ENGINE COOLANT TEMPERATURE SWITCH — Continued

0317 00

INSTALLATION

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

1.

Coat threads of switch (2) with sealing compound.

2.

Install switch (2) in thermostat housing (3).

3.

Connect circuit 33 lead (1) to switch (2).

FOLLOW-THROUGH STEPS

1.

Refill cooling system (WP 0194 00).

2.

Start engine (see your -10). Check for coolant leaks at engine coolant temperature switch (WP 0050 00).

3.

Stop/shutdown engine (see your -10).

4.

Close power plant front access door and raise trim vane (see your -10).

END OF TASK

0317 00-2