TM-9-2350-261-20-2
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4
TM-9-2350-261-20-2 - Page 75 of 1008
TM 9-2350-261-20-2
REPLACE FAN DRIVE BELTS
0211 00
THIS WORK PACKAGE COVERS:
Removal (page 0211 00-1).
Installation (page 0211 00-2).
Adjustment (page 0211 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0780 00, Item 29)
Materials/Parts
Lockwasher (4)
Personnel Required
Unit Mechanic
Equipment Condition
Engine stopped/shutdown (see your -10)
Power plant rear access panel removed (WP 0431 00,
WP 0432 00, or WP 0433 00)
REMOVAL
1.
Remove four screws (1), flat washers (2), lockwashers (3), and fan pulley access cover (4) from power plant
compartment rear bulkhead. Discard lockwashers.
2.
Loosen locknut (5) that secures rod end (6) to adjusting nut (7).
3.
Turn adjusting nut (7) counterclockwise to loosen drive belts (8).
4.
Remove drive belts (8) from idler pulleys (9) and (10) and fan pulleys (11) and (12).
021100-1
Back to Top
