TM-9-2350-261-20-2
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4
TM-9-2350-261-20-2 - Page 73 of 1008
TM 9-2350-261-20-2
REPLACE COMBAT FILLER COVER AND LOCK
0210 00
THIS WORK PACKAGE COVERS:
Removal (page 0210 00-1).
Installation (page 0210 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0780 00, Item 29)
Personnel Required
Unit Mechanic
Equipment Condition
Engine stopped/shutdown (see your -10)
Power plant rear access panel removed (WP 0431 00,
WP 0432 00, or WP 0433 00)
REMOVAL
1.
Loosen wing nut (1). Remove thumbscrew (2), washer (3), and spacer (4) from power plant grill.
2.
Remove spring pin (5), washer (6), spring (7), and pin (8) from power plant grill. Discard spring pin.
3.
Remove two spring pins (9) and cover (10) from power plant grill. Discard spring pins.
4.
On M1068 and M577A2 only, remove locknut (11), washer (12), and rod end (13) from power plant grill. Discard
locknut.
021000-1
Locknut (M1068 and M577A2 only)
Spring pin (3)
M
s
a
t
t
r
e
a
r
P
i
/
a s
l
Back to Top
