TM-9-2350-261-20-2
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4
TM-9-2350-261-20-2 - Page 81 of 1008
TM 9-2350-261-20-2
REPLACE FAN DRIVE ADJUSTABLE IDLER AND PULLEY
0213 00
THIS WORK PACKAGE COVERS:
Removal (page 0213 00-1).
Installation (page 0213 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0780 00, Item 29)
Snap Ring Pliers (WP 0780 00, Item 45)
Torque Wrench (WP 0780 00, Item 104)
Materials/Parts
Cotter pin (4)
Personnel Required
Unit Mechanic
References
W P 02 11 00
Equipment Condition
Engine stopped/shutdown (see your -10)
Carrier blocked (see your -10)
Ramp lowered (see your -10)
Power plant rear access panel removed (WP 0431 00,
WP 0432 00, or WP 0433 00)
REMOVAL
1.
Remove fan drive belts (WP 0211 00).
2.
Remove bolt (1), nut (2), washer (3), and fan idler pulley (4) from idler pulley arm (5).
3.
Remove cotter pin (6), headed pin (7), and adjustable rod end (8) from idler pulley arm (5). Discard cotter pin.
4.
Loosen nut (9). Remove rod end (8) and nut (9) from adjusting nut (10).
021300-1
Back to Top
