TM-9-2350-261-20-2
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4
TM-9-2350-261-20-2 - Page 83 of 1008
TM 9-2350-261-20-2
REPLACE FAN DRIVE ADJUSTABLE IDLER AND PULLEY — Continued
0213 00
9.
Secure fan idler pulley (3) to arm (9) with nut (18), washer (19), and bolt (20). TIGHTEN NUT TO 50-55 LB-FT
(68-75 N·M) TORQUE. Use torque wrench.
10. Install and adjust fan drive belts (WP 0211 00).
FOLLOW-THROUGH STEPS
WARNING
Wearing loose clothing around moving parts can allow personnel to get caught and cause injury
or death. Tuck in loose clothing.
1.
Start engine (see your -10). Check adjustable idler and fan drive belts for proper operation.
2.
Raise and lock ramp (see your -10).
3.
Engine stopped/shutdown (see your -10).
4.
Install power plant rear access panel (WP 0431 00, WP 0432 00, or WP 0433 00).
END OF TASK
0213 00-3/4 blank
Back to Top
