TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 792 of 1008

TM 9-2350-261-20-2

ADJUST STEERING LINKAGE — Continued

0387 00

4.

Remove two cotter pins (3), clevis pins (4), and washers (5) from two clevises (6) and steering lever cross-shaft (7).

Discard cotter pins.

NOTE

If holes in differential brake levers will not align with tapped holes in differential housing,

loosen adjustment by turning brake adjusting nut to left until holes align. Re-adjust differential

brakes (WP 0362 00).

5.

Align holes in differential brake levers (8) with tapped holes in differential housing. Secure with two screws (9).

6.

Lock steering lever (1) and steering lever (2) in front notch of quadrant (3).

0387 00-2