TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 798 of 1008

TM 9-2350-261-20-2

ADJUST BRAKE LOCKING PAWL — Continued

0388 00

10. Remove three washers (7), spring (8), and two spring pins (9) from plunger rod (10), and remove rod from steering lever

(3). Discard spring pins.

11. Loosen pawl jamnuts (11) to adjust pawl (1) to quadrant clearance.

12. Set clearance between 5/32 inch (4 mm) and 7/32 inch (6 mm). Then tighten jamnuts (11). One complete turn will

move pawl (1) 1/32 inch (0.8 mm).

13. Place plunger rods (1) back in steering levers (2). Secure each rod with three washers (3), spring (4), and two new

spring pins(5)

.

0388 00-4