TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 805 of 1008

TM 9-2350-261-20-2

REPAIR LEFT/RIGHT STEERING LEVERS — Continued

0389 00

6.

Install right steering lever (1) on cross-shaft (2). Secure with new locknut (3), and screw (4).

7.

Install bearing (5) in bracket (6) and secure with two retaining rings (7). Use snap ring pliers.

8.

Install two quadrants (8) and stop levers (9) on bracket (6) with two screws (10) and new locknuts (11).

NOTE

The same number of shims removed will be installed.

9.

Install bracket (6) on cross-shaft (2). Install shims (12) between bracket (6) and driver’s floor plate. Secure with two

washers (13) and screws (14).

10. Install left steering lever (15) on cross-shaft (2). Secure with woodruff key (16), new locknut (17), and screw (18).

11. TIGHTEN LOCKNUT (17) TO 204-240 LB-IN (23-27 N·M) TORQUE. Use torque wrench.

038900-5