TM 9-2350-261-20-2
REPAIR LEFT/RIGHT STEERING LEVERS — Continued
0389 00
NOTE
Both right and left steering levers, in this section are removed and installed the same way.
8.
Remove spring pin (1) from plunger (2). Remove plunger from rod (3). Discard spring pin.
9.
Remove two spring pins (4) from rod (3). Discard spring pins.
10. Remove rod (3), three washers (5), and spring (6) from lever arm (7).
11. Remove nut (8), pawl (9), and nut sleeve (10) from rod (3).
12. Remove locknut (11), flat washer (12), washer (13), bolt (14), and rod clip (15) from steering lever (7). Discard locknut.
CLEAN, INSPECT, AND REPLACE
1.
Check lever arm, button, and spring. Replace cracked or broken parts.
2.
Check all threads. Replace parts with stripped threads.
3.
Check pawl. Replace nicked or worn pawl.
4.
Check bearing, bracket, retaining rings, and quadrants for wear or damage. Replace all damaged parts.
038900-3