TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 809 of 1008

TM 9-2350-261-20-2

REPLACE STEERING LEVERS CROSS-SHAFTS AND BEARINGS — Continued

0390 00

5.

Remove two cotter pins (1), clevis pins (2), and washers (3) that secure two clevises (4) to cross shaft (5) and cross shaft

(6). Discard cotter pins.

6.

Remove five screws (7), washers (8), and locknuts (9) that secure cover (10), cover (11), and gasket (12) to five press

nuts (13) in power plant compartment bulkhead. Discard gasket and locknuts.

7.

Remove two screws (14), washers (15), locknuts (16), tapered pins (17), arm bearing (18), and shim (19) from bracket

(20). Discard tapered pins and locknuts.

8.

Remove cross-shaft (5), cross-shaft (6), and arm bearing (18) as a unit through power plant compartment bulkhead.

9.

Separate cross-shaft (5), cross-shaft (6), arm bearing (18), and two thrust washers (21).

10. Remove lubrication fittings (22) from arm bearing (18) and cross-shaft (5).

039000-3