TM 9-2350-261-20-2
REPAIR LEFT/RIGHT STEERING LEVERS — Continued
0389 00
NOTE
The same number of shims removed will be installed.
3.
Remove two screws (7), washers (8), bracket (9), and shims (10) from driver’s floor plate.
4.
Remove bracket (9) from cross-shaft (5).
5.
Remove two screws (11), two stop levers (12), two quadrants (13) and two locknuts (14) from bracket (9). Discard
locknuts.
6.
Remove two retaining rings (15), one bearing (16) from inside bracket (9).
7.
Remove screw (17), locknut (18), and right steering lever (1) from cross-shaft (5). Discard locknut.
0389 00-2