TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 816 of 1008

TM 9-2350-261-20-2

REPLACE DIFFERENTIAL CROSS-SHAFTS AND BEARINGS — Continued

0392 00

REMOVAL

1.

Disconnect two return springs (WP 0387 00).

2.

Remove four cotter pins (1), clevis pins (2), and links (3) from differential and steering lever cross-shaft (4), cross-shaft

(5), and link arm (6). Discard cotter pin.

3.

Remove four screws (7), washers (8), and locknuts (9) that secure two bearings (10) to two brackets (11). Discard

locknuts.

4.

Remove two screws (12), four washers (13), and two locknuts (14) that secure bearing (15) and shim (16) to driver’s

compartment bulkhead. Discard locknuts.

5.

Remove differential and steering cross-shaft (4), cross-shaft (5), bearing (10), bearing(15)

,andlinkarm(6)from

power plant compartment as a unit.

6.

Remove screw (17), locknut (18), and link arm (6) from cross-shaft (4). Remove woodruff key (19) from cross-shaft.

Discard locknut.

0392 00-2