TM 9-2350-261-20-2
REPLACE LOWER ACCELERATOR PEDAL
0395 00
THIS WORK PACKAGE COVERS:
Removal (page 0395 00-1).
Inspection-Acceptance and Rejection Criteria (page 0395 00-1).
Installation (page 0395 00-2).
Adjustment (page 0395 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0780 00, Item 29)
Materials/Parts
Cotter pin (2)
Personnel Required
Unit Mechanic
References
See your -10
Equipment Condition
Engine stopped/shutdown (see your -10)
Carrier blocked (see your -10)
Driver’s seat removed (WP 0478 00)
REMOVAL
1.
Remove two cotter pins (1) from headed pins (2). Discard cotter pins.
2.
Remove two headed pins (2) and washers (3) from accelerator pedal (4), pedal mount (5), and pedal link (6).
INSPECTION-ACCEPTANCE AND REJECTION CRITERIA
1.
Check pins, pedal mount, and pedal link. Replace parts that are cracked or have worn pivot holes.
039500-1