TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 828 of 1008

TM 9-2350-261-20-2

REPLACE UPPER ACCELERATOR PEDAL ASSEMBLY — Continued

0396 00

CAUTION

Detent plunger and spring will fall out if detent block is turned over during removal.

5.

Remove two screws (10), locknuts (11), and pedal detent block (12) from pedal(8). Discard locknuts.

6.

Remove two nuts (13) and set screws (14) from detent block (12). Then turn detent block (12) to allow two springs (15)

and ball bearings (16) to slide out.

7.

Remove plunger (17) and spring (18) from detent block (12).

8.

Remove four screws (19) and remove guide (9) from power plant compartment.

INSPECTION-ACCEPTANCE AND REJECTION CRITERIA

1.

Check pins, pedal mount, and pedal link. Replace parts that are cracked or have worn pivot holes.

0396 00-2