TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 110 of 932

TM 9-2350-261-20-3

REPLACE DRIVER’S HATCH PERISCOPE GUARD AND QUICK RELEASE

ASSEMBLY — Continued

0446 00

CLEAN, INSPECT, AND REPAIR

1.

Clean parts with solvent, cleaning compound.

2.

Inspect springs for corrosion, distortion, weakness, cracks, and breaks. Replace damaged springs.

3.

Inspect parts for corrosion, distortion, wear, cracks, and loose or missing parts. Repair or replace damaged or missing

parts.

ASSEMBLY

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

1.

Apply primer and sealing compound to threads of screws (1).

2.

Install four retainers (2) and (3) and screws (1) on top plate (4).

3.

Install two springs (5) on retainers (2).

0446 00-6