TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 535 of 932

TM 9-2350-261-20-3

REPLACE RAMP LINKAGE (M1064 ONLY)

0560 00

THIS WORK PACKAGE COVERS:

Removal (page 0560 00-1).

Clean, Inspect, and Repair (page 0560 00-3).

Installation (page 0560 00-3).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Materials/Parts

C otter pin (

4

)

K ey washer (

4

)

Locknut

Lockwasher (2)

Square washer

Personnel Required

Unit Mechanic

References

WP 0559 00

Equipment Condition

Engine stopped (see your -10)

Ramp lowered (see your -10)

On right side only, mortar ammunition racks removed

(WP 0507 00)

REMOVAL

NOTE

Removal and installation of ramp linkage are the same for both sides of carrier. Text is for

onesideonly

.

1.

Remove cotter pin (1), headed pin (2), and connecting link (3) from arm (4). Discard cotter pin.

2.

Remove cotter pin (5), headed pin (6), and connecting link (3) from clevis (7). Discard cotter pin.

3.

Loosen locknut (8). Remove clevis (7) and locknut from rod (9). Discard locknut.

056000-1