TM 9-2350-261-34
INSTALL ELECTRONIC EQUIPMENT HEATER KIT (M577A2 ONLY)
0058 00
THIS WORK PACKAGE COVERS:
Installation (page 0058 00-1).
INITIAL SETUP:
Maintenance Level
Direct Support
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0104 00, Item 19)
Materials/Parts
Adhesive silicone sealant (WP 0105 00, Item 3)
Sealing compound (WP 0105 00, Item 17)
Sealing compound primer (WP 0105 00, Item 21)
Silicone compound (WP 0105 00, Item 22)
Solvent, cleaning compound (WP 0105 00, Item 10)
Personnel Required
Track Vehicle Repairer 63H10
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Ramp lowered (see your -10)
Battery ground lead disconnected (see your -20)
Floor plates removed (see your -20)
Carrier fuel shutoff valve closed (see your -10)
INSTALLATION
NOTE
This kit can not be installed if the 5.0 KW APU is installed.
1.
Nut (1) is located on longest support link (2). If nut is on inside of radio mount platform (3), remove nut and screw (4).
Install screw from inside of platform and nut on outside of link.
005800-1