TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 414 of 785

TM 9-2350-261-34

INSTALL ELECTRONIC EQUIPMENT HEATER KIT (M577A2 ONLY) — Continued

0058 00

8.

Install inlet nipple (1), elbow (3), and adapter (2) in heater assembly.

9.

Install sleeve (4) and nut (5) on heater fuel inlet hose (6).

10. Connect fuel inlet hose (6) to adapter (2) on heater assembly (7).

NOTE

Before you secure heater assembly clamps, make sure there is at least 1 inch (3 cm) clearance

between hull side wall and rear of heater assembly.

11. Place heater assembly (7) in clamps (8). Tighten clamps (8).

005800-3