TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 658 of 871

TM 9-2350-277-34

NOTE

Tag leads/cables before removing/disconnecting.

4.

Remove ten screws (2), cable W5 five leads (21), and six leads (20) from terminal block TB2 (3).

5.

Remove two set screws (26), cable W6 (24), and two leads E4 (25) from terminal block TB1 (9).

6.

Remove screw (13), ground lead W632 (17), ground lead W432 (16), and two lockwashers (11) from carrier wall.

Discard lockwashers.

7.

Remove screw (13), two ground leads E5 (12), and two lockwashers (11) from carrier wall. Discard lockwashers.

8.

Remove three screws (19), locknuts (14), six washers (15), and blackout curtain (18) from inverter housing (1). Discard

locknuts.

NOTE

The new true-sine wave inverter cable has a 15-pin arrangement versus a 25-pin for older

inverters. The 25 and 15 pin cables are not interchangeable for the old and new style inverters.

9.

Disconnect two cable W15 connectors (22) from inverters IN1 and inverter IN2 (23).

009400-3

Change 5

REPLACE INVERTER AND INVERTER HOUSING ASSEMBLY A2 (M1068A3

ONLY) (ALL EXCEPT OUTBACK) — Continued

0094 00