TM-9-2350-311-20-1

HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A2, M109A3, M109A4 AND M109A5

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL FOR HULL, POWERPLANT, DRIVE CONTROLS, TRACKS, SUSPENSION, AND ASSOCIATED COMPONENTS

AUGUST 1994

TM-9-2350-311-20-1 - Page 741 of 1275

TM 9-2350-311-20-1

8-38 SLAVE START RECEPTACLE — CONTINUED

b. Installation

1

2

3

4

5

Install ground lead (4), two new Iockwashers (14), and screw (13) to bulkhead.

Install insulator (12), new gasket (11 ), and slave start receptacle assembly (10).

Install protective cover (9) on receptacle assembly (10).

Install four flat washers (7), four new Iockwashers (6), four screws (8), and four nuts (5). Ensure protective

cover (9) cord is attached under one screw.

Connect ground lead (4) and power lead (3), two new Iockwashers (2), and two screws (1). Wrap exposed wire

connections with tape.

NOTE

FOLLOW-ON MAINTENANCE:

Connect

batteries (para 8-10)

8-39 EXTERNAL POWER RECEPTACLE (M109A4/M109A5)

This task covers:

a. Removal

b. Installation

INITIAL SETUP

Applicable Configurations

Gasket (item 162, Appx G)

M109A4/M109A5

Lockwasher (item 54, Appx G)

Lockwasher (item 80, Appx G)

T

OO

I

S

Lockwasher (item 111, Appx G)

General mechanic’s tool kit (item 64, Appx H)

Lockwashers (4) (item 87, Appx G)

Materials/Parts

Equipment Condltlons

. .

Electrical tape — black (item 62, Appx D)

Batteries disconnected (para 8-28)

8-96