TM-9-2350-311-34-1
HULL, POWERPLANT, DRIVE CONTROLS, TRACKS, SUSPENSION, AND ASSOCIATED COMPONENTS: HOWITZER, MEDIUM, SELF-PROPELLED, 155MM
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
SEPTEMBER 1994
TM-9-2350-311-34-1 - Page 74 of 352
WARNING
TM 9-2350-311-34-1
4-3 SEPARATION OF ENGINE FROM TRANSMISSION AND TRANSFER ASSEMBLY —
CONTINUED
b. Assembly
Never crawl under equipment when performing maintenance unless equipment is
securely blocked. Keep clear of equipment when it is being raised or lowered. Do not
allow heavy components to swing while suspended by lifting device. Exercise extreme
caution when working near a cable under tension.
1 Install coolant hoses and tubes to engine (TM 9-2350-311-20-1).
2 Install oil tubes to engine (TM 9-2350-311-20-1),
3
Install new gasket (12) and connect transfer assembly (11) to engine (10). Attach engine supports.
4-1 8
Back to Top
