TM-9-2350-311-34-1
HULL, POWERPLANT, DRIVE CONTROLS, TRACKS, SUSPENSION, AND ASSOCIATED COMPONENTS: HOWITZER, MEDIUM, SELF-PROPELLED, 155MM
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
SEPTEMBER 1994
TM-9-2350-311-34-1 - Page 77 of 352
TM 9-2350-311-34-1
3
Coat splined teeth with adhesive-sealant and install coupler (3) and mass ring (2). Check for 0.010-to 0.012-in.
(0.25- to 0.30-mm) clearance between mass ring (2) and engine (8). If clearance exceeds 0.015 in. (0.38 mm),
carefully strike high points with hammer.
4 Install 12 screws (1). Torque screws to 40-50 Ib-ft (54-68 N•m).
NOTE
FOLLOW-ON MAINTENANCE:
Connect engine and transmission (para 4-3)
4-21
Back to Top
