TM-9-2350-311-34-1
HULL, POWERPLANT, DRIVE CONTROLS, TRACKS, SUSPENSION, AND ASSOCIATED COMPONENTS: HOWITZER, MEDIUM, SELF-PROPELLED, 155MM
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
SEPTEMBER 1994
TM-9-2350-311-34-1 - Page 86 of 352
TM9-2350-311-34-1
5-1 ELECTRIC FUEL PUMPS — CONTINUED
a. Disassembly — Continued
3
4
5
6
7
8
9
Remove three nuts (7), three Iockwashers
(11). Discard Iockwashers and gaskets.
(8), cover assembly (5), gasket (9), terminal plate (10), and gasket
Loosen nut (12) and remove nut (13) and serrated washer (14).
Remove discharge fitting (3) and preformed packing (15). Discard preformed packing.
Loosen clamp
Remove hose
(16).
(17) and clamp (16).
Remove two screws (18), two nuts (19), and four Iockwashers (20) from hanger assembly (21) and fuel pump
(6). Discard Iockwashers.
Remove ground lead (22).
5-4
Back to Top
