TM-9-2350-358-BD
HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A6
TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT SUPPORT MAINTENANCE
MARCH 1994
TM-9-2350-358-BD - Page 235 of 343
TM 9-2350-358-BD
11-11. HYDRAULIC TUBE AND HOSE REPAIR (HIGH PRESSURE) - CONTINUED
9.
Refill hydraulic fluid to proper level and check for leaks.
10.
Record the BDAR action taken.
When mission is complete, as soon as practical, repair the equipment/system
using standard maintenance procedures.
11-12. HYDRAULIC HIGH-PRESSURE TUBING REPAIR (PERMASWAGING)
General Information:
Permaswaging fittings may be used to repair damaged tubing.
These repairs require cutting and replacing the damaged
tube section.
Permaswaging fitting and replacement tubing are rated up to 3000 psi operating pressure.
Limitations:
None
Personnel/Time Required:
•
1 soldier
•
0.5-1.5 hour
Materials/Tools:
•
Tube cutter
•
Hydraulic fluid (item 36, Appendix C)
•
Hand file (found in M2/3 generic BDR kit, Section III, Appendix C)
•
Metal tubing (scavenge from available source)
•
AN fittings (found in M2/3 generic BDR kit, Section III, Appendix C)
•
MS fittings (found in M2/3 generic BDR kit, Section III, Appendix C)
11-17
Back to Top
