Figure 5-10
Figure 5-12
Figure 5-11
Figure 5-13
Remove 17 long bolts (A) and lockwashers.
Remove two short bolts (B) and lock washers.
Remove oil transfer plate assembly (A) and rear
pump check ball (B).
Remove six snap
jumper tubes.
Note.
Snap rings
in bore.
rings
(A) securing six small
are not in grooves, merely snug
Using a 5/16 bolt (A) threaded into jumper tubes
(B), remove 6 jumper tubes (B) and 12 seal rings
(C), and remove seal rings from jumper tubes.
Remove one large jumper tube (D) and two seal
rings, and remove seal rings from jumper tube.
5-6