TM-9-2520-254-34
TRANSMISSION, AUTOMATIC, ALLISON, MODEL TX100-1
TECHNICAL MAUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE MANUAL
OCTOBER 1971
TM-9-2520-254-34 - Page 57 of 126
Figure 5-17
Figure
5-14 (Step 14).
Flatten washer (A) securing flange bolt (B)
Figure
5-15
(Step
15).
Using a 3/4 inch wrench and an improvised holding
tool (A), remove flange bolt (B), flat washer (C),
and seal ring (under washer).
Figure
5-16 (Step 16).
Using improvised output flange removing tool (A)
attached to output flange (B), hold tool (A) to keep
flange stationary, and pull flange from shaft.
Using puller assembly 5120-572-8712 (8356201)
pull rear output oil seal (B) from bore in housing
(C).
5-7
Back to Top
