TM-9-2520-254-34
TRANSMISSION, AUTOMATIC, ALLISON, MODEL TX100-1
TECHNICAL MAUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE MANUAL
OCTOBER 1971
TM-9-2520-254-34 - Page 65 of 126
Figure 5-44
Figure 5-46
Figure 5-45
Figure 5-47
Install compressor assembly 4910-572-8643
(8356187) (A) cm reverse clutch assembly (B) to
compress springs. Remove two roll pins (C).
Remove compressor assembly.
Remove reverse planetary carrier and pitot oil
collector assembly (A). Remove thrust washer (B)
from counterbore of carrier.
Remove rear pitot tube (A). Using a 1/2-inch
wrench, remove five rear oil pump bolts (B) and
five washers.
Remove reverse back plate assembly (A). Remove
12 springs (B) from back plate (A) only if
replacement is necessary. Remove reverse ring gear
(C). four internal-splined plates (D), three external-
tanged plates (E), and apply plate (F) as a unit,
and separate parts.
5-15
Back to Top
