TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 253 of 933

8. INSTALL ELEMENT (1) ON CAP (2).

a. Coat two new preformed packings (3)

and o-ring (4) with transmission oil.

b. Install two new packings (3) on cap (2).

c. Install new o-ring (4) in top of

element (1).

d. Install element (1) on cap (2).

Remove rag and push cap (2) with

element (1) into hole in controller

assembly (5).

Aline four screw holes (6) in cap (2)

with screw holes (7) in controller

assembly (5).

Using plastic-faced hammer, tap and

seat cap (2) into place.

10. INSTALL FOUR NEW LOCK

WASHERS (8) AND SCREWS (9).

11. USING 3/8-lNCH DRIVE TORQUE

WRENCH AND 7/16-lNCH

SOCKET, TORQUE FOUR SCREWS (9)

TO 85-110 in-lb (98-127 cmkg).

9. INSTALL CAP (2) WITH ELEMENT (1).

a.

b.

c.

END OF TASK

Change 1

3-7 (3-8 blank)

TM 9-2520-270-34