TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 251 of 933

REPLACE CONTROLLER FLUID FILTER ELEMENT

DESCRIPTION

This task covers: Remove (page 3-5). Install (page 3-7).

INITIAL SETUP

Tools:

Materials/Parts: (cont)

General mechanic’s tool kit:

Wiping rag—(Item 13, App B)

automotive — (Item 33, App C)

Hydraulic o-ring packing

Inserted hammer face holder —

Lock washer (4)

(Item 39A, App C)

Preformed packing (2)

Inserted hammer face — (Item 39B, App C)

Inserted hammer face — (Item 39C, App C) Personnel Required:

Socket wrench set – (Item 89, App C)

Torque wrench — (Item 99, App C)

Track Veh Rep 63H10

Materials/Parts:

Equipment Conditions:

Cleaning solvent – (Item 1, App B)

Transmission mounted

Transmission oil — (Item 12, App B)

See page 2-144.

on tip-over stand.

REMOVE

could poison you. Read warn-

ing in the front of this

manual.

CAUTION

Do not allow dirt to remain around controller

cap. Dirt falling in transmission can cause

damage.

CLEAN CONTROLLER CAP (1).

a. Using wiping rag dampened with

cleaning solvent,

area around cap.

clean cap (1) and

GO TO NEXT PAGE

Change 2

3-5

TM 9-2520-270-34