TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 586 of 933

TM 9-2520-270-34

CAUTION

Do not install self-locking bolts with-

out sealing compound. Damage to equip-

ment can occur.

24. INSTALL BRAKE (5) AND OIL

BAFFLE (6).

a.

b.

c.

d.

e.

Coat inside of bearing bore (7)

with transmission oil.

Aline brake (5) with two pins (8).

Install brake until fully seated.

Aline oil baffle (6) over brake

mounting holes.

Coat threads of six new self-locking

bolts (9) with sealant compound.

Secure brake (5) and baffle (6) with

six washers (10) and bolts (9).

25. USING 1/2-lNCH DRIVE TORQUE

WRENCH, TORQUE SIX BOLTS (9) TO

150-160 ft-lb (21-22 mkg).

GO TO NEXT PAGE

Change

1

4-259