TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 578 of 933

TM 9-2520-270-34

NOTE

This gear cluster is installed when intermediate

housing is installed on transmission housing.

83. TURN GEAR CLUSTER (1) OVER.

84. INSTALL NEW BEARING (2).

a. If bearing (2) was removed, go to

step 84b. If not, go to step 85.

b. Using screwdriver, install retaining

ring (3) and thrust washer bearing (4).

c. Install bearing (2).

d. Using screwdriver, install second thrust

washer bearing (4) and second retaining

ring (3).

85. INSTALL LEFT-HAND SINGLE DISK

BRAKE. See task REPLACE LEFT-HAND

SINGLE DISK BRAKE. page 4-255.

END OF TASK

Change 4

4-252.1 (4-252.2 blank)