TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 583 of 933

TM 9-2520-270-34

4. REMOVE ELBOW (1).

a. Unscrew elbow (1).

b. Remove and discard preformed

packing (2).

6. REMOVE AND DISCARD TWO

PREFORMED PACKINGS (9).

5. REMOVE SPINDLE ASSEMBLY (3)

IF INSTALLED.

a. Remove two screws (4), washers (5),

and sleeve spacers (6).

b. Rotate spindle assembly (3) until

part of screw holes (7) show.

c. Using screw holes (7) as pry points,

carefully pry spindle assembly (3) out

of brake (8).

7.

INSPECT METAL SEAL RING (10).

a. Inspect ring (10) for damage. See

page 2-5.

b. If ring (10) is damaged, go to step 8.

If not, go to step 9.

8. REMOVE RING (10).

a. Squeeze ring (10) with fingers until

hook (11) releases.

b. Spread open and remove ring (10).

Discard ring.

4-256