TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 575 of 933

TM 9-2520-270-34

70. INSTALL NEW BEARING (1).

a. If bearing (1) was removed, go to

step 70b. If not, go to step 71.

b. Using arbor press and bearing installer

(Item 10), press bearing (1)

into spur gear (2).

c. Using screwdriver, install retaining

ring (3).

72. INSTALL NEW BEARING (5)

IN GEAR (6).

a.

b.

c.

4-250

If bearing (5) was removed, go to

step 72b. If not, go to step 73.

Using arbor press and bearing installer

(Item 6), press bearing (5) into

gear (6).

Using screwdriver, install retaining

ring (7) in groove (8).

Change 1

71. INSTALL SPUR GEAR (2).

a. Install gear (2).

b. Using slip-joint pliers, install

interlocking retaining ring (4).

73.

74.

REPAIRER AND HELPER, TURN

HOUSING (9) OVER.

INSTALL GEAR (6).

a. Using plastic-faced hammer, tap

gear (6) onto mechanical housing (10).