TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 644 of 933

TM 9-2520-270-34

2. REMOVE LIFTING EYE (1).

a. Remove two screws (2) and lock

washers (3). Discard lock washers.

b. Remove eye (1).

4.

5.

ATTACH LIFTING DEVICE (11)

TO REMOVAL ASSEMBLY (12).

WARNING

Hanging loads could kill or

injure you. Keep away from

hanging loads and overhead

equipment.

REMOVE OUTPUT HOUSING (7).

a.

b.

c.

Loosen output housing (7) using

pry point (13).

Evenly lift output housing (7).

Remove and discard gasket (14).

3.

REMOVE SCREWS (4), (5) AND

FROM LEFT-HAND OUTPUT

HOUSING (7).

(6)

a. Remove two screws (4) and lock

washers (8). Discard lock washers.

b. Remove five screws (5) and lock

washers (9). Discard lock washers.

c. Remove 19 screws (6) and lock

washers (10). Discard lock washers.

Lower output housing (7) onto

work surface.

GO TO NEXT PAGE

Change 1

4-315