TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 641 of 933

TM 9-2520-270-34

REPAIR RIGHT-HAND RETAINER PLATE ASSEMBLY INSERT

DESCRIPTIO N

This task gives the location and size of the insert used in the right-hand retainer plate assembly. Part

or item numbers of tools, kits, and inserts, and working dimensions are given below. For procedures

to remove, repair, and install inserts, refer to Replace Inserts. See page 2-171.

INITIAL SETUP

Tools:

General mechanic’s tool kit:

automotive — (Item 33, App C)

Industrial goggles – (Item 39, App C)

Inside/outside indicator caliper —

(Item 41, App C)

Portable electric drill – (Item 58, App C)

Screw threading set – (Item 65, App C)

Socket wrench set – (Item 88, App C)

Transmission insert repair kit —

(Item 103, App C)

Compressed air source, 30 psi

(207 kPa) maximum

Materials/Parts:

Sealant compound — (Item 11, App B)

Transmission oil – (Item 12, App B)

Personnel Required:

Track Veh Rep 63H10

Equipment Conditions:

Right-hand retainer plate assembly on

workbench. See page 4-279.

END OF TASK

4-312

Change 1