TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 633 of 933

TM 9-2520-270-34

REPAIR RIGHT-HAND OUTPUT CARRIER ASSEMBLY

DESCRIPTIO N

This task covers: Disassemble (page 4-304). Asemble (page 4-307).

INITIAL SETUP

Tools:

Personnel Required:

General mechanic’s tool kit:

Track Veh Rep 63H10

automotive — (Item 33, App C)

Socket wrench set – (Item 89, App C)

References:

Torque wrench – (Item 100, App C)

Wire-twister pliers — (Item 107, App C)

TM 9-214

Equipment Conditions:

Materials/Parts:

Lockwire — (Item 5, App B)

Sealant compound – (Item 11, App B)

DISASSEMBL E

1. REMOVE 12 SCREWS (1) FROM

SERVICE BRAKE HUB (2).

a.

b.

4-304

Remove and discard Iockwire (3)

securing 12 screws (1).

Remove 12 screws (1) from hub (2).

Change 1

Right-hand output carrier assembly on

workbench. See page 4-294.

2.

3.

REMOVE HUB (2) FROM OUTPUT

CARRIER (4).

INSPECT HUB (2) FOR DAMAGE.

See page 2-5.

a. Replace hub (2) if damaged.