TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 630 of 933

30. OBTAIN DIMENSION C.

a. Subtract dimension A from

dimension B.

b. Record as dimension C.

32. REMOVE TWO WOOD BLOCKS

FROM UNDER HOUSING (2).

31. SELECT NEW WASHER (1) FROM SHIM

SET.

a. Using micrometer caliper set measure

one washer (1) from shim set that is

0.006 to 0.013 inch (0.15 to 0.33 mm)

less than dimension C.

33. REPAIRER AND HELPER PLACE

TWO WOOD BLOCKS (3) (ITEM 2)

UNDER CARRIER ASSEMBLY (4)

SO THAT SPUR GEAR (5) IS NOT

TOUCHING WORKBENCH.

GO TO NEXT PAGE

Change 3

4-301

TM 9-2520-270-34